FixVault
Home › Chevrolet › 2010 › Traverse LS, AWD › Repair and Diagnosis › External Pages › Different car › Section 31 (Front Suspension System) › Repair Instructions › Strut, Strut Component, and Spring Replacement › Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the strut from the vehicle. Refer to Strut Assembly Replacement .
    2. Fig 1: Compressing/Releasing Lower Part Of Shock Spring
    GM743246Courtesy of GENERAL MOTORS CORP.
  2. Install the strut (2) in the J 45400  (1).
    3. NOTE: The spring is compressed when the strut moves freely.
    Fig 2: View Of Compressor Forcing Screw & Coil Spring
    GM743241Courtesy of GENERAL MOTORS CORP.
  3. Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.
  4. Use a 45 TORX® socket in order to hold the strut shaft. Use the J 42991  to remove the upper strut mount nut.
  5. Remove the strut from the J 45400  .
  6. Loosen the compressor forcing screw (1) until the upper strut mount and coil spring (2) may be removed.
  7. Remove the upper strut mount and the coil spring from the J 45400  .
About FixVault