FixVault
Home › Chevrolet › 2011 › Aveo LS, 4D Hatchback, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.6L (LXV) - Repair Instructions › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Installation Procedure

Installation Procedure

  1. Install the fuel tank pressure sensor.
    2. Fig 1: Fuel Lines & Connectors At Fuel Sender Assembly
    GM2042509Courtesy of GENERAL MOTORS CORP.
  2. Connect the fuel tank pressure sensor connector (2).
    3. Fig 2: Fuel Pump Access Cover
    GM2042507Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel pump access cover (1).
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  5. Install the rear seat. Refer to Rear Seat Replacement (Hatchback) .
About FixVault