FixVault
Home › Chevrolet › 2011 › Camaro LS, Automatic › Repair and Diagnosis › External Pages › Different car › Section 249 (Programming And Setup - All Systems) › Repair Instructions › HVAC System Control Module Programming and Setup › Replace and Program Control Module

Replace and Program Control Module

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement control module, perform the following procedure:

  1. Install EL-49642  SPS Programming Support Tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K33 HVAC Control Module - Programming - Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select K33 HVAC Control Module - Programming - Setup and follow the on-screen instructions.
  5. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
About FixVault