FixVault
Home › Chevrolet › 2011 › Camaro LS, Standard › Repair and Diagnosis › Accessories & Equipment › Drivers Assistance Systems - ADAS › Object Detection System - Park Assist System › Repair Instructions › Rear Object Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Object Sensor
    GM1699865Courtesy of GENERAL MOTORS CORP.
  1. Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Disconnect electrical from the rear object sensor.
    3. NOTE: The rear object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.
  3. Lift the locking tabs on the housing and remove the rear object sensor.
About FixVault