FixVault
Home › Chevrolet › 2011 › Caprice › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting System › Repair Instructions › Transmission Control Position Indicator Bulb Replacement › Installation Procedure

Installation Procedure

    Fig 1: Lamp Socket
    GM1947043Courtesy of GENERAL MOTORS CORP.
  1. Install a new transmission floor shift control indicator light bulb to the socket (1).
  2. Install the transmission floor shift control indicator lamp to the rear of the shift control housing by turning the lamp socket clockwise.
  3. Install the trim plate panel. Refer to Console Trim Plate Replacement (9C3) .
  4. Check the operation of the transmission floor shift control indicator light.
About FixVault