FixVault
Home › Chevrolet › 2011 › Caprice › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Splash Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Engine Splash Shield To Front Subframe Retaining Screws
    GM1936964Courtesy of GENERAL MOTORS CORP.
  1. Install the engine splash shield (2) to the front subframe.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the engine splash shield to front subframe retaining screws (1).

    Tighten 

    Tighten the screws to 9 N.m (80 lb in).

  3. Lower the vehicle.
About FixVault