FixVault

Removal Procedure

  1. Open the rear compartment lid.
  2. Remove the rear compartment floor panel carpet. Refer to Rear Compartment Floor Panel Carpet Replacement (Sedan) .
  3. Remove the rear end trim finish panel. Refer to Rear End Trim Finish Panel Replacement .
  4. Fig 1: Rear Compartment Side Trim Panel
    GM2232704Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear compartment side trim panel to body retaining scrivets (1).
  6. Detach and move the rear compartment side trim panel (2) away from the left body side panel.
  7. Fig 2: Battery Negative Terminal
    GM2321904Courtesy of GENERAL MOTORS CORP.
    WARNING:

    Refer to Battery Disconnect Warning .

  8. Remove the battery negative cable to battery terminal retaining nut (2).
  9. Detach the battery negative cable (1) from the battery negative terminal (3).
  10. Fig 3: Battery Negative Terminal
    GM2321907Courtesy of GENERAL MOTORS CORP.
  11. Disconnect the current sensor electrical connector (3).
  12. Remove the battery negative cable to body retaining bolt (2).
  13. Remove the battery negative cable (1) from the vehicle.