Section 33 (Rear Drive Axle)
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Diagnostic Information and Procedures
- Repair Instructions
- Rear Axle Lubricant Level Inspection
- Differential Oil Replacement
- Rear Axle Housing Cover and Gasket Replacement
- Rear Axle Shaft Seal Replacement - Inner
- Drive Pinion Flange/Yoke and/or Oil Seal Replacement
- Drive Pinion and Ring Gear Replacement
- Differential Drive Pinion Gear Bearing Replacement
- Differential Replacement
- Differential Bearing Replacement
- Differential Overhaul
- Differential Case Replacement
- Differential Case Cleaning and Inspection
- Bearings Inspection
- Pinion and Ring Gear Inspection
- Rear Axle Housing Inspection
- Shims Inspection
- Differential Carrier Bearing Preload Adjustment
- Pinion Depth Adjustment
- Backlash Adjustment
- Gear Tooth Contact Pattern Inspection
- Notes
- Drive Pinion and Ring Gear Identification
- Gear Tooth Nomenclature
- Adjustments Affecting Tooth Contact
- Testing Procedure
- Correct Contact Pattern
- Drive Side Heel - Coast Side Toe Contact Pattern
- Drive Side Toe - Coast Side Heel Contact Pattern
- Drive Side Heel - Coast Side Heel Contact Pattern
- Drive Side Toe - Coast Side Toe Contact Pattern
- High Flank Contact Pattern
- Low Flank Contact Pattern
- Limited Slip Differential Disassemble
- Limited Slip Differential Cleaning and Inspection
- Limited Slip Differential Assemble
- Description and Operation
- Special Tools and Equipment