Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Lower Control Arm Adjuster Nut | 50 N.m Plus an additional 150 degrees |
37 lb ft Plus an additional 150 degrees |
| Front Lower Front Control Arm Nut at the Steering Knuckle | 40 N.m Plus an additional 90 degrees |
30 lb ft Plus an additional 90 deg rees |
| Front Lower Rear Control Arm Nut at the Steering Knuckle | 40 N.m Plus an additional 90 degrees |
30 lb ft Plus an additional 90 degrees |
| Front Lower Rear Control Arm Bolt at the Frame | 50 N.m Plus an additional 120 degrees |
37 lb ft Plus an additional 120 degrees |
| Front Stabilizer Shaft Link Nut at the Front Strut | 50 N.m | 36 lb ft |
| Front Stabilizer Shaft Link Nut at the Stabilizer Shaft | 50 N.m | 36 lb ft |
| Front Stabilizer Shaft Insulator Clamp Nuts | 17 N.m | 13 lb ft |
| Front Suspension Strut Bolts at the Steering Knuckle | 80 N.m Plus an additional 180 degrees |
59 lb ft Plus an additional 180 degrees |
| Front Suspension Strut Nut at the Front Suspension Strut Mounting Plate | 70 N.m | 52 lb ft |
| Front Suspension Strut Nut at the Front Suspension Strut Insulator | 70 N.m | 52 lb ft |
| Front Wheel Bearing/Hub Bolts | 108 N.m | 79 lb ft |