Installation Procedure

Fig 1: Oiling Male Pipe Ends (Metal Collar)

Courtesy of GENERAL MOTORS CORP.

WARNING:

Always apply a few drops of clean engine oil to the male pipe ends before connecting the fuel pipe fittings. This will ensure proper reconnection and prevent a possible fuel leak. Always replace O-rings.

Apply a few drops of clean engine oil to the male pipe end.

Fig 2: Pushing Fittings Together

Courtesy of GENERAL MOTORS CORP.

Push both sides of the fuel line connections together in order to snap the retaining tabs into place.

Fig 3: Ensuring Connection (Metal Collar) Is Secure

Courtesy of GENERAL MOTORS CORP.

Once installed, pull on both sides of the fuel line connections to ensure that the connection is secure.