FixVault
Home › Chevrolet › 2011 › Chevy Express G2500, Van Cargo Extended, 6.6 L › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Front Seat Belt Retractor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Shoulder/Seat Belt Retractor Assembly Mounting
    GM158293Courtesy of GENERAL MOTORS CORP.
  1. Install the shoulder/seat belt retractor assembly to the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the shoulder/seat belt retractor retaining bolt to the lower pillar and tighten to 52 N.m (38 lb ft).
  3. Install the front door lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement .
  4. Install the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement .
    5. Fig 2: Bolt Retaining Shoulder/Seat Belt Guide
    GM158290Courtesy of GENERAL MOTORS CORP.
  5. Install the shoulder/seat belt guide to the shoulder belt guide adjuster.
  6. Install the upper shoulder/seat belt guide retaining bolt to the vehicle and tighten to 10 N.m (89 lb in).
    7. Fig 3: Shoulder/Seat Belt Guide
    GM887183Courtesy of GENERAL MOTORS CORP.
  7. Install the shoulder/seat belt guide to the guide adjuster cover (1).
About FixVault