FixVault
Home › Chevrolet › 2011 › Cruze Eco › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Wiring Systems And Power Management - Repair Instructions › Repair Instructions › Fuse Block Replacement › Removal Procedure

Removal Procedure

  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
    2. Fig 1: View Of Fuse Box Cover, Battery Cable And Nut
    GM2027594Courtesy of GENERAL MOTORS CORP.
  2. Unlock the retaining tabs on the battery fuse box cover, and open the cover (1).
  3. Remove the positive battery cable to starter nut (2).
  4. Remove the positive battery cable to starter (3) from the battery.
  5. Remove the positive battery cable. Refer to Battery Positive Cable Replacement
    6. Fig 2: Identifying Fuse Block, Body Wiring Harness And Nuts
    GM2027692Courtesy of GENERAL MOTORS CORP.
  6. Remove 2 body wiring harness nuts (1) and body wiring harness.
  7. Remove fuse block (2).
About FixVault