FixVault
Home › Chevrolet › 2011 › Cruze LS, Standard › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System - Park Assist System › Repair Instructions › Rear Object Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement
  2. Disconnect electrical from the rear object sensor.
  3. Lift the locking tabs on the housing and remove the rear object sensor.
About FixVault