FixVault
Home › Chevrolet › 2011 › Cruze LS, Standard › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Programming And Setup - All Systems › Repair Instructions › Inflatable Restraint Sensing and Diagnostic Module Programming and Setup › Sensing and Diagnostic Module Setup

Sensing and Diagnostic Module Setup

The replacement of some components will require a setup procedure for complete repair. The SDM Setup Procedure must be performed if any of the following components are replaced:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Inflatable Restraint Sensing and Diagnostic Module Setup and follow the on-screen instructions.
  3. Clear any DTCs after completing the Setup procedure.
About FixVault