Circuit/System Testing
- Ignition ON, verify that DTC C0186, C0196, C019B, or C0710 is not set.
- If DTC is set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Ignition OFF, inspect the B99 Steering Wheel Angle Sensor and B119 Multi-axis Acceleration Sensor for correct installation.
- If loose or incorrect installation is diagnosed, correct the installation of the component.
- Replace the K17 Electronic Brake Control Module (EBCM) and verify DTC does not reset.
- If the DTC resets, replace the Q5 brake pressure modulator valve assembly.