Installation Procedure
- Remove the caps from fuel feed tank pipe and fuel feed pipe.
Courtesy of GENERAL MOTORS CORP.
- Install the fuel feed pipe and secure with the rear fuel pipe clip.
- Connect the fuel tank feed pipe connector (1) to the fuel feed pipe. Refer to Plastic Collar Quick Connect Fitting Service .
- Connect the fuel pressure sensor wiring harness plug (2).
Courtesy of GENERAL MOTORS CORP.
- Install the fuel feed pipe (1) to lower bulkhead and underbody.
- Close the 4 fuel pipe clips (2).
- Install the drivetrain and front suspension frame. Refer to Drivetrain and Front Suspension Frame Replacement
.
Courtesy of GENERAL MOTORS CORP.
- Clip the fuel feed pipe to the bulk head retainer clip (2).
- Clip the fuel feed pipe (1) to the retainer clip (4).
- Connect the fuel feed pipe connector (3) to the fuel injector rail. Refer to Plastic Collar Quick Connect Fitting Service .
- Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
.
- Close the hood.