FixVault
Home › Chevrolet › 2011 › Cruze LTZ › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.4L (LUJ) - Repair Instructions › Repair Instructions › Fuel Pressure Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: Refer to Gasoline/Gasoline Vapors Warning .
WARNING: Refer to Safety Goggles and Fuel Warning .
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    3. Fig 1: Fuel Pressure Sensor
    GM2373081Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel pressure sensor wiring harness plug (2) from the fuel pressure sensor (1).
    4. Fig 2: Fuel Pressure Sensor And Fuel Pressure Relief Valve
    GM2373082Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel pressure sensor (1) from the fuel pressure relief valve (2).
  5. Remove the fuel pressure sensor seal ring (3).
About FixVault