FixVault
Home › Chevrolet › 2011 › Cutaway 4.8 A › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 4.8L, 5.3L, 6.0L - Repair Instructions › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement .
  2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
    3. Fig 1: Intake Manifold MAP Sensor
    GM260159Courtesy of GENERAL MOTORS CORP.
  3. Remove the MAP sensor (1) from the intake manifold.
About FixVault