FixVault
Home › Chevrolet › 2011 › Cutaway 6.6 L › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 6.6L (LGH) - Repair Instructions › Repair Instructions › Fuel Level Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Fuel Level Sensor Electrical Connector, Locking Tangs And Retaining Clip
    GM740113Courtesy of GENERAL MOTORS CORP.
  1. Remove the sending unit. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the fuel level sensor electrical connector (1).
  3. Remove the sensor retaining clip (3).
  4. Squeeze the locking tangs (2) and remove the fuel level sensor.
About FixVault