FixVault
Home › Chevrolet › 2011 › HHR LS, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.2L Or 2.4L - Repair Instructions › Repair Instructions › Camshaft Position Sensor Replacement - Intake › Removal Procedure

Removal Procedure

    Fig 1: CMP Sensor Electrical Connector
    GM1639712Courtesy of GENERAL MOTORS COMPANY
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Disconnect the intake camshaft position (CMP) sensor electrical connector (2).
    3. Fig 2: Identifying CMP Sensor
    GM1578483Courtesy of GENERAL MOTORS COMPANY
  3. Remove the CMP sensor bolt.
  4. Remove the CMP sensor.
About FixVault