FixVault
Home › Chevrolet › 2011 › HHR LS, Automatic › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Steering Gear Boot Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Outer & Inner Tie Rods
    GM854987Courtesy of GENERAL MOTORS COMPANY
  1. Remove the rack and pinion outer tie rod end. Refer to Steering Linkage Outer Tie Rod Replacement .
  2. Remove the rack and pinion inner tie rod nut and discard it.
  3. Remove the outer steering gear boot clamp.
  4. Cut the inner steering gear boot clamp and discard it.
    5. Fig 2: View Of Steering Gear Boot
    GM854991Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:

    After removing the boot, inspect the inner tie rod for evidence of corrosion or contamination. If none is evident, continue with the repair. If corrosion or contamination is evident, replace the steering gear.

  5. Remove the steering gear boot from the steering gear.
About FixVault