FixVault
Home › Chevrolet › 2011 › HHR LS, Automatic › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Steering Column Jacket Replacement › Installation Procedure

Installation Procedure

  1. Clean the steering column shaft splines with a lint-free towel. Ensure the steering column shaft splines are free of dirt and debris.
    2. NOTE:

    A new steering column jacket comes with lubricant.

  2. Apply 2 grams (0.07 oz) of lubricant to the steering column shaft splines.
  3. Position the new steering column jacket on the steering column.
  4. Ensure the steering wheel alignment mark at the top of the steering column jacket shaft is in the 12 o'clock position.
    5. Fig 1: View Of Upper Jacket
    GM854910Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  5. Install the steering column bolts and tighten to 11 N.m (97 lb in).
  6. Remove the steering column and jacket assembly from the vise.
  7. Install the steering column and jacket assembly to the vehicle. Refer to Steering Column Replacement .
  8. Install the ignition lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement .
About FixVault