FixVault
Home › Chevrolet › 2011 › HHR LS, Standard › Repair and Diagnosis › External Pages › Different car › Section 106 (Battery, Charging System And Starting System) › Repair Instructions › Battery Current Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Negative Battery Cable
    GM1631636Courtesy of GENERAL MOTORS CORP.
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement .
  2. Remove the tape securing the battery current sensor to the negative battery cable.
    3. Fig 2: Identifying Battery Current Sensor
    GM1631638Courtesy of GENERAL MOTORS CORP.
  3. Remove the battery current sensor from the negative battery cable.
About FixVault