FixVault

Removal Procedure

WARNING: This page is about a different car, the 2009 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Pump Module
    GM1636703Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel pump module. Refer to Fuel Pump Module Replacement .
  2. Release the retaining tabs (2) on the reservoir body and begin to slide the level sensor out away from the reservoir.
  3. Carefully slide the level sensor the rest of the way out of the reservoir.