FixVault
Home › Chevrolet › 2011 › Impala LTZ › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Steering Column Tilt Spring Replacement › Installation Procedure

Installation Procedure

  1. Tilt the steering column to the UP position.
    2. Fig 1: Spring Guide & Tilt Spring
    GM293250Courtesy of GENERAL MOTORS CORP.
  2. Install the steering column spring guide into the steering column tilt spring.
    3. Fig 2: View Of Tilt Spring, Steering Column Support Assembly, & Steering Column Tilt Head Assembly
    GM293251Courtesy of GENERAL MOTORS CORP.
  3. Install the steering column tilt spring (1) onto the steering column support assembly (2) and onto the steering column tilt head assembly by using the following procedure:
    1. Install the steering column tilt spring (1) onto the steering column tilt head assembly.
    2. Install the steering column tilt spring (1) onto the post on the steering column support assembly (2).
  4. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
About FixVault