FixVault
Home › Chevrolet › 2011 › Malibu LS, 2.4 1 › Repair and Diagnosis › Transmission › Automatic Trans › Shift Lock Control System › Repair Instructions › Automatic Transmission Shift Lock Control Actuator Replacement › Removal Procedure

Removal Procedure

    Fig 1: Shift Lock Control Solenoid Connector & Solenoid
    GM1285267Courtesy of GENERAL MOTORS CORP.
  1. Remove the automatic transaxle control assembly. Refer to Transmission Control Replacement for the MH8 transmission or Transmission Control Replacement for the MH2 transmission.
  2. Disconnect the Shift Lock Control Solenoid connector from the solenoid.
    3. Fig 2: View Of Solenoid And Ball-Sockets
    GM1285268Courtesy of GENERAL MOTORS CORP.
  3. Using a flat-blade screwdriver or similar tool pry the solenoid off of the ball-sockets on the solenoid plunger and solenoid body.
    4. Fig 3: Shift Lock Control Solenoid
    GM1285269Courtesy of GENERAL MOTORS CORP.
  4. Remove the shift lock control solenoid.
About FixVault