FixVault
Home › Chevrolet › 2011 › Malibu LT, 2.4 1 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.4L - Repair Instructions › Repair Instructions › Fuel Level Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Fuel Level Sensor Electrical Connector and Locking Tab
    GM2042219Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel pump module assembly. Refer to Fuel Tank Fuel Pump Module Replacement .
  2. Disconnect the fuel level sensor electrical connector (1).
  3. Disengage the locking tab (2) on the fuel level sensor by pushing inward.
    4. Fig 2: Identifying Fuel Level Sensor & Alignment Feature
    GM2042226Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel level sensor (1) from the alignment feature (2).
About FixVault