FixVault
Home › Chevrolet › 2011 › Traverse LS, AWD › Repair and Diagnosis › Electrical › Instrument Panel System Displays And Gauges › Diagnostic Information and Procedures › DTC P0463 › Component Testing

Component Testing

  1. Ignition OFF, remove the fuel level sender.
  2. While sweeping the fuel level sensor through its full range of motion, test for a minimum resistance value of less than 42 Ω and a maximum value greater than 246 Ω between the signal terminal D and the low reference terminal C.
    • If not within the specified range, replace the fuel level sensor.
About FixVault