FixVault
Home › Chevrolet › 2011 › Traverse LS, AWD › Repair and Diagnosis › External Pages › Different car › Section 14 (Battery, Charging System And Starting System) › Repair Instructions › Battery Negative Cable Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Ground Harness Wire Terminal & Negative Battery Clamp
    GM2232745Courtesy of GENERAL MOTORS CORP.
  1. Remove the battery fuse block/engine control module cover.
  2. Disconnect the negative battery terminal (1).Refer to Battery Negative Cable Disconnection and Connection 
  3. Remove the negative battery ground terminal (2).
  4. Remove the auxiliary negative battery ground bolt (2).
    5. Fig 2: Locating Engine Block Battery Ground Terminal & Bolt
    GM2235595Courtesy of GENERAL MOTORS CORP.
  5. Remove the engine block battery ground terminal (1) and bolt (2).
  6. Remove the negative battery cable (3).
About FixVault