Mode Control Cam Actuator Replacement

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Mode Control Cam Actuator & Components

Courtesy of GENERAL MOTORS COMPANY

Call out	Component Name
Preliminary Procedures Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the brake pedal assembly. Refer to Brake Pedal Assembly Replacement (With Accelerator and Bracket)Brake Pedal Assembly Replacement (Pedal Lever Assembly) .
1	Mode Cam Actuator Cover Screw (Qty: 1) CAUTION: Refer to Fastener Caution . Procedure Disconnect the mode actuator electrical connector. Tighten 1.5 N.m (13 lb in)
2	Mode Cam Actuator Cover.
3	Mode Cam Actuator Gears
4	Mode Cam Actuator Screw (Qty: 2) Tighten 1.5 N.m (13 lb in)
5	Mode Cam Actuator Procedures Perform the actuator calibration procedure. Refer to Actuator Recalibration . Clear all HVAC module DTC.