FixVault

Component Testing

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness at the S38 ignition mode switch.
  2. With the button released, test for 4.5-5.5 KΩ between the signal terminal 3 and the low reference terminal 7.
    • If not within the specified range, replace the S38 ignition mode switch.
  3. With the button pressed, test for 1-1.5 KΩ between the signal terminal 3 and the low reference terminal 7.
    • If not within the specified range, replace the S38 ignition mode switch.