FixVault
Home › Chevrolet › 2011 › Traverse LS, AWD › Repair and Diagnosis › Steering › Power Steering System › Diagnostic Information and Procedures › DTC C0450 › Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the VES actuator.
  2. Test for 5-10 ohms between the control terminals 1 and 2.
    • If not within the specified range, replace the VES actuator.
  3. Test for infinite resistance between each terminal and the VES actuator housing/case.
    • If not the specified value, replace the VES actuator.
About FixVault