Power Steering Pump Pulley Replacement

Fig 1: View Of Power Steering Pump Pulley

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the power steering pump. Refer to Power Steering Pump Replacement .
1	Power Steering Pump Pulley Procedure Use the J 25034-C removerto remove the power steering pump pulley. Use the J 25033-C installerto install the power steering pump pulley. Ensure the axial tolerance of the power steering pulley on the shaft is within 0.25 mm (0.010 in). Special Tools J 25033-C Pulley Installer J 25034-C Pulley Remover For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedure
Remove the power steering pump. Refer to Power Steering Pump Replacement .

Power Steering Pump Pulley

Procedure

Use the J 25034-C removerto remove the power steering pump pulley.
Use the J 25033-C installerto install the power steering pump pulley.
Ensure the axial tolerance of the power steering pulley on the shaft is within 0.25 mm (0.010 in).

Special Tools

For equivalent regional tools, refer to Special Tools .