Front Side Door Lock Replacement

Fig 1: Front Side Door Lock

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front side door rear channel. Refer to Front Side Door Window Rear Channel Replacement .
1	Front Side Door Lock Screws (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure Place the window in the full up position. Remove arm rest support. Remove the water deflector. Disconnect the door lock electrical connector. Tighten: 10 N.m (89 lb in)
2	Front Side Door Lock Procedure Turn the lock assembly releasing the lock cylinder rod from the lock. Transfer components as necessary. In order to prevent outside handle lever pre-load, latch, outside handle, handle bracket and cover/cap shall be fully secured to the door prior to securing integral latch clip to outside handle rod. Integral latch clip shall be in the full up position while securing to outside handle rod. Refer to Front Side Door Outside Handle Rod Adjustment . Tip: Inspect the door lock system for proper operation before installing the door trim panel.

Callout

Component Name

Preliminary Procedure:
Remove the front side door rear channel. Refer to Front Side Door Window Rear Channel Replacement .

Front Side Door Lock Screws (Qty: 3)

CAUTION: Refer to Fastener Caution .

Procedure

Tighten: 10 N.m (89 lb in)

Front Side Door Lock

Procedure

Turn the lock assembly releasing the lock cylinder rod from the lock.
Transfer components as necessary.
In order to prevent outside handle lever pre-load, latch, outside handle, handle bracket and cover/cap shall be fully secured to the door prior to securing integral latch clip to outside handle rod. Integral latch clip shall be in the full up position while securing to outside handle rod. Refer to Front Side Door Outside Handle Rod Adjustment .

Tip: Inspect the door lock system for proper operation before installing the door trim panel.