FixVault
Home › Chevrolet › 2011 › Volt › Repair and Diagnosis › External Pages › Different car › Section 14 (Lighting System) › Repair Instructions › Brake Pedal Position Sensor Calibration › Calibration Procedure

Calibration Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake.
  2. Place the transmission in the PARK position for automatic transmission or NEUTRAL position for manual transmission.
  3. Install a scan tool.
  4. Clear all BCM DTCs before proceeding.
  5. Navigate to the Configuration/Reset Functions menu of the BCM.
  6. Select the Brake Pedal Position Sensor Learn procedure and follow the directions displayed on the screen.
About FixVault