FixVault
Home › Chevrolet › 2011 › Volt › Repair and Diagnosis › External Pages › Different car › Section 14 (Lighting System) › Repair Instructions › Brake Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake pedal position sensor electrical connector.
    2. Fig 1: Brake Pedal Position Sensor Bolt
    GM2384631Courtesy of GENERAL MOTORS COMPANY
  2. Remove the brake pedal position sensor bolt (1).
    3. Fig 2: Brake Pedal Position Sensor And Spacer
    GM2384633Courtesy of GENERAL MOTORS COMPANY
  3. Remove the brake pedal position sensor (1) and spacer (2).
About FixVault