FixVault
Home › Chevrolet › 2011 › Volt › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Heating, Ventilation, And Air Conditioning › Repair Instructions › Blower Motor Control Module Replacement

Blower Motor Control Module Replacement

Fig 1: Blower Motor Control Module
GM2387663Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the I/P Lower Trim Panel Insulator Refer to Instrument Panel Lower Trim Panel Insulator Replacement .
  2. Reposition any wiring or hoses to gain access to blower motor control.
1 Blower Motor Control Module Screw (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  2 N.m (17 lb in)
2 Blower Motor Control Module
Procedure: 
Disconnect the wiring connector.
About FixVault