FixVault
Home › Chevrolet › 2012 › Camaro LS, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls/Fuel - 3.6L - Repair Instructions › Repair Instructions › Ignition Coil Replacement - Bank 1 › Removal Procedure

Removal Procedure

WARNING:

Refer to Safety Glasses and Compressed Air Warning .

  1. Ignition OFF.
    2. WARNING:

    Refer to Battery Disconnect Warning .

  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Remove the intake manifold sight shield.
    4. Fig 1: Identifying Ignition Coil To Camshaft Cover Retaining Bolts
    GM1949892Courtesy of GENERAL MOTORS COMPANY
  4. Remove the ignition coil harness connectors from the ignition coils.
  5. Remove the ignition coil to camshaft cover retaining bolts (1).
  6. Remove the ignition coils (2) from the vehicle.
About FixVault