Cylinder Head - Top/End Views
WARNING: This page is about a different variant/trim than selected.
Cylinder Head - Top/End Views
| Hole Location | Thread Size | Drill | Counter Bore Tool | Stop Collar | Tap | Driver | Insert | Drill Depth (Maximum) | Tap Depth (Minimum) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| - | - | J 42385- | MM | (IN) | MM | (IN) | |||||
| 1 | M8 x 1.25 | 206 | 207 | N/A | 208 | 209 | 210 | 26.5 | (1.04) | 19.0 | (0.784) |
| 2 | M6 x 1.0 | 201 | 202 | N/A | 203 | 204 | 205 | 20.05 | (0.789) | 16.05 | (0.632) |
| 3 | M10 x 1.5 | 211 | 212 | N/A | 213 | 214 | 215 | 28.0 | (1.10) | 20.0 | (0.787) |
| 4 | M6 x 1.0 | 201 | 202 | N/A | 203 | 204 | 205 | 22.5 | (0.885) | 15.0 | (0.688) |