Engine Block - Left/Right Side Views
WARNING: This page is about a different variant/trim than selected.
Engine Block - Left/Right Side Views
| Hole Location | Thread Size | Drill | Counter Bore Tool | Stop Collar | Tap | Driver | Insert | Drill Depth (Maximum) | Tap Depth (Minimum) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| - | - | J 42385- | MM | (IN) | MM | (IN) | |||||
| 1 | M8 x 1.25 | 206 | 207 | N/A | 208 | 209 | 210 | 22.5 | (0.885) | 17.5 | (0.688) |
| 2 | M8 x 1.25 | 206 | 207 | N/A | 208 | 209 | 210 | 28.5 | (1.122) | 23.0 | (0.905) |
| 3 | M8 x 1.25 | 206 | 207 | N/A | 208 | 209 | 210 | 21.5 | (0.846) | 16.0 | (0.629) |
| 4 | M10 x 1.25 | 211 | 212 | N/A | 213 | 214 | 215 | 29.0 | (1.141) | 23.0 | (0.905) |
| 5 | M10 x 1.5 | 211 | 212 | N/A | 213 | 214 | 215 | 27.0 | (1.062) | 21.5 | (0.846) |
| 6 | M16 x 1.5 | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||
| 7 | M11 x 2.0 | 105 | N/A | N/A | 106 | 107 | 108 | 69.0 | (2.72) | 60.0 | (2.36) |
| 8 | M28 x 1.25 | N/A | N/A | N/A | N/A | N/A | N/A | Through | Through | ||
| Bolt hole 7 has a 30 mm (1.18 in) counterbore included in the 69.0 mm (2.72 in) drill depth. Use sleeve J 42385-315 with the drill and tap. | |||||||||||