Blower Motor Control Module Replacement

Fig 1: Blower Motor Control Module And Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the I/P Compartment. Refer to Instrument Panel Compartment Replacement . Reposition any wiring or hoses to gain access to blower motor control.
1	Blower Motor Control Module Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (17 lb in)
2	Blower Motor Control Module Procedure Disconnect the wiring connector.

Callout

Component Name

Preliminary Procedures

Blower Motor Control Module Screw (Qty: 2)

CAUTION:

Tighten
2 N.m (17 lb in)

Blower Motor Control Module
Procedure
Disconnect the wiring connector.