FixVault
Home › Chevrolet › 2012 › Camaro LS, Automatic Trans › Repair and Diagnosis › Steering › Power Steering System › Diagnostic Information and Procedures › DTC C047A › Circuit/System Testing

Circuit/System Testing

  1. With a scan tool perform the Power Steering Control Module Calibration  procedure Steering Angle Sensor Centering and Software Endstop Learning.
  2. Verify that DTC C047A does not set.
    • If the DTC does set 

      Replace the K43 Power Steering Control Module.

    • If the DTC does not set 
  3. All OK. Refer to Testing for Intermittent Conditions and Poor Connections
About FixVault