FixVault
Home › Chevrolet › 2012 › Caprice 3.6 3 › Repair and Diagnosis › Engine Mechanical › Fuel System › Engine Controls/Fuel - 3.6L - Repair Instructions › Repair Instructions › Mass Airflow Sensor with Intake Air Temperature Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: MAF Sensor And Air Cleaner Assembly Screws
    GM2660726Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW MAF sensor (1) to the air cleaner assembly (4).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the MAF sensor to air cleaner assembly screws (3) and tighten to 1 Y (9 lb in).
  3. Connect the MAF sensor harness connector (2) to the NEW MAF sensor (1).
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Primary) , Battery Negative Cable Disconnection and Connection (Auxiliary) .
About FixVault