FixVault
Home › Chevrolet › 2012 › Caprice 3.6 3 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls/Fuel - 3.6L - Repair Instructions › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Intake Manifold Assemble
    GM2219477Courtesy of GENERAL MOTORS COMPANY
  1. Ignition OFF.
  2. Disconnect the engine wiring harness from the manifold absolute pressure (MAP) sensor (2).
  3. Remove the MAP sensor to intake manifold retaining bolt (1).
  4. Remove the MAP sensor (2) from the intake manifold assembly.
  5. Discard the MAP sensor seal.
About FixVault