FixVault

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the mirror to the door.
  2. Fig 1: Identifying Mirror To Door Retaining Screws
    GM1939967Courtesy of GENERAL MOTORS CORP.
    CAUTION:

    Refer to Fastener Caution .

  3. Install the mirror to door retaining screws (1) and tighten to 3 N.m (27 lb in).
  4. Fig 2: Identifying Mirror To Door Harness Electrical Connector
    GM1939956Courtesy of GENERAL MOTORS CORP.
  5. Connect the mirror to door harness electrical connector (1).
  6. Fig 3: View Of Inner Panel
    GM1939966Courtesy of GENERAL MOTORS CORP.
    NOTE:

    Push the inner panel (1) to attach the retainers.

  7. Install the inner panel (1) to the door (2).
  8. Install the upper auxiliary weatherstrip. Refer to Front Side Door Upper Auxiliary Weatherstrip Replacement .
  9. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .