Checking and Adding Power Steering Fluid

If you are checking the fluid level after servicing the steering system, bleed the air from the system. Refer to Power Steering System Bleeding .
Clean the power steering fluid reservoir and the reservoir cap.

Fig 1: Identifying Fluid Level

Courtesy of GENERAL MOTORS COMPANY

Ensure that the fluid level is at the correct level mark on the power steering fluid reservoir.
- If fluid is hot, the fluid level should be at the MAX level mark on the reservoir.
- If fluid is cold, the fluid level should be at the MIN level mark on the reservoir.
Remove the reservoir cap.

CAUTION:

When adding fluid or making a complete fluid change, always use the proper power steering fluid. Failure to use the proper fluid will cause hose and seal damage and fluid leaks.

NOTE:

Use approved new power steering fluid from a sealed container.

Add power steering fluid if necessary. For fluid specifications refer to Fluid and Lubricant Recommendations .
Install the power steering fluid reservoir cap.