FixVault
Home › Chevrolet › 2012 › Captiva Sport LS, FWD › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Brake Pressure Modulator Valve Bracket Replacement › Installation Procedure

Installation Procedure

    Fig 1: BPMV Bracket Nut
    GM1873935Courtesy of GENERAL MOTORS COMPANY
  1. Install the BPMV bracket.
  2. Loosely install the BPMV bracket nut (1).
    3. Fig 2: BPMV Bracket Bolts
    GM1873934Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the 2 BPMV bracket bolts (1) and tighten to 10 N.m (89 lb in).
  4. Tighten the BPMV bracket nut to 10 N.m (89 lb in).
    5. Fig 3: BPMV Assembly
    GM1873931Courtesy of GENERAL MOTORS COMPANY
  5. Carefully position the BPMV assembly (1) to the BPMV bracket insulators.
    6. Fig 4: BPMV Bolt
    GM1873930Courtesy of GENERAL MOTORS COMPANY
  6. Install the BPMV bolt (1) and tighten to 10 N.m (89 lb in).
  7. Install the radiator surge tank. Refer to Radiator Surge Tank Replacement .
  8. Install the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement .
About FixVault