FixVault
Home › Chevrolet › 2012 › Captiva Sport LS, FWD › Repair and Diagnosis › Suspension › Wheel Alignment › Wheel Alignment System › Repair Instructions › Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

  1. Position and lock the steering wheel with the vehicle with the wheels in the straight forward position.
    2. Fig 1: Identifying Tie Rod Inner Jam Nut
    GM854976Courtesy of GENERAL MOTORS COMPANY
  2. Loosen both of the steering linkage inner tie rod nuts.
    3. NOTE:

    The steering linkage inner tie rod must rotate freely from the boot seal surface. Do not allow the boot to rotate.

  3. Loosen the steering linkage inner tie rod seal to boot surface.
  4. Using a wrench, rotate the steering linkage outer tie rod to increase or decrease the toe angle specifications. Refer to Wheel Alignment Specifications .
    5. CAUTION:

    Refer to Fastener Caution .

  5. Tighten the steering linkage inner tie rod nuts to 60 N.m (44 lb ft).
  6. Inspect the toe angle to ensure proper adjustment and adjust as necessary.
About FixVault