FixVault
Home › Chevrolet › 2012 › Chevy Express G1500, Van Cargo, 4.3L Eng VIN X › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 4.3L - Repair Instructions › Repair Instructions › Knock Sensor 2 Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Engine Wiring Harness & Components
    GM1877018Courtesy of GENERAL MOTORS COMPANY
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Reposition the knock sensor sleeve (2) down, away from the knock sensor.
  3. Disconnect the engine wiring harness electrical connector from the knock sensor (1).
    4. Fig 2: View Of Knock Sensor & Bolt
    GM1877020Courtesy of GENERAL MOTORS COMPANY
  4. Remove the knock sensor bolt and sensor.
About FixVault