FixVault
Home › Chevrolet › 2012 › Chevy Express H1500, Van Cargo › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 4.8L, 5.3L, 6.0L - Repair Instructions › Repair Instructions › Camshaft Position Sensor Replacement › Installation Procedure

Installation Procedure

  1. GM4859602Courtesy of GENERAL MOTORS COMPANY

    Lubricate the camshaft position sensor seal (1) with clean engine oil. ADHESIVES, FLUIDS, LUBRICANTS, AND SEALERS

  2. GM4857700Courtesy of GENERAL MOTORS COMPANY

    Install the camshaft position sensor (1) to the engine front cover.

  3. GM4857699Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector (4) to the camshaft position sensor.

  4. Position the camshaft position sensor wire bracket (3).
  5. Connect the electrical connector (2) to the camshaft position actuator magnet.
    6. CAUTION:

    Refer to Fastener Caution .

  6. Install the engine front cover bolts (1) and tighten to 25 N.m (18 lb ft).
  7. GM4857698Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector (1).

  8. Crankshaft Balancer - Install - CRANKSHAFT BALANCER REPLACEMENT
About FixVault